Akshay Controls And Systems Private Limited

• 2 x ETHERNET port for connecting to field devices and the engineering tool
•  2 x USB port for optional connection of a USB stick, mouse or keyboard
• Audio interface for connecting a headphone or loudspeaker

Digital inputs-12, digital output-12, analog inputs -2

Features of the XLE Operator Interface include:

• 128×64 graphical display
• 20-key keypad with function key and numeric entry capability
• Logic engine features 256KB of application memory with a 0.7mS/K logic scan.
• (2) RS-232/485 ports support RTU/Modbus Master/Slave, ASCII In/Out, and PLC/Drive downloadable  protocols
• integrated CsCAN port
• Removable Mass Storage device
• CANopen Master/Slave Support

1. Continuous supervision of remote navigation lights and wiring, whether the light is ON or OFF.

2. All indication lamps are long-life LEDs for extended service life.

3. Green LED indicates power-on status for each navigation lamp.

4. Red LED and internal buzzer signal any lamp fault condition.

5. Front-panel buzzer silence button for quick alarm acknowledgement.

6. Protection against external short circuits.

7. Wide input current sensing range for various lamp ratings.

8. Solid-state modular design with optically isolated sensors for high reliability.

9. Plug-in electronic modules with captive knurled screws for easy maintenance.

10. Large rear terminals provided for direct field wiring.

11. Compact, rugged construction — withstands marine shock and vibration.

12. Available in multiple configurations to meet vessel-specific requirements.

AINL-8, AINL-12+12, AINL-14+14 (with mimic diagram) — each model features built-in marine-approved controllers.

The system provides visual and acoustic alarms in case of navigation lamp failure.
Electronic circuitry continuously monitors the current through each navigation lamp:

• Upon switch-on, a green LED indicates normal lamp operation.

• Lamp failure triggers a flashing red LED and continuous buzzer alarm.

• Alarm relay contact activates an external horn if required.

• All alarm signals flash until acknowledged.

• New alarms are identified by flashing signals and common audio alarm.

• After silencing, steady red light indicates unrectified faults.

• Reset input provided with 1-second delay for noise immunity.

Each navigation lamp is protected by an individual switch and fuse.
Fuse failure is automatically indicated by a red LED on the input PCB.
Power and control circuits are optically isolated for enhanced safety and reliability.

• Navigation Light Control for Marine Vessels

• Offshore Platforms and Workboats

• Tugboats, PSV, and Research Vessels

• BULK, Tanker, Passanager vessels 

No built-in I/O

Features of the XLE Operator Interface include:

• 128×64 graphical display
• 20-key keypad with function key and numeric entry capability
• Logic engine features 256KB of application memory with a 0.7mS/K logic scan.
• (2) RS-232/485 ports support RTU/Modbus Master/Slave, ASCII In/Out, and PLC/Drive downloadable  protocols
• integrated CsCAN port
• Removable Mass Storage device

Digital inputs-12, digital outputs- 12, Analog inputs-4



Features of the XLE Operator Interface include:

• 128×64 graphical display
• 20-key keypad with function key and numeric entry capability
• Logic engine features 256KB of application memory with a 0.7mS/K logic scan.
• (2) RS-232/485 ports support RTU/Modbus Master/Slave, ASCII In/Out, and PLC/Drive downloadable  protocols
• integrated CsCAN port
• Removable Mass Storage device
• CANopen Master/Slave Support

12 DC in, 6 Relay Out, 4 – 12-bit Analog In

Features of the XLT Operator Interface include:

• 
  160×128 sunlight readable graphics display
• high resolution resistive touchscreen
• 4 function keys and a system key
• (2) RS-232/485 ports support RTU/Modbus Master/Slave, ASCII In/Out, and PLC/Drive downloadable protocols
• integrated CsCAN port
• Removable Mass Storage device
• CANopen Master/Slave Support (available as a field installable firmware update, this removes CsCAN support)