Akshay Controls And Systems Private Limited

Isolation amplifier; Current and voltage input signal; Current and voltage output signal; Digital output; Supply voltage: 24 VDC; 6 mm module width
Short description:

The configurable isolation amplifier converts, amplifies, filters, and electrically isolates standard analog signals.

 

Features:

• PC configuration interface
• Digital switching output
• Calibrated measurement range switching
• Analog, unipolar, and bipolar (standard) signals at input
• Switchable 
  clipping capability limits the standard analog signal to the upper range values
• Safe 3-way isolation with 2.5 kV test voltage acc. to EN 61140

Short description:

The signal splitter converts, amplifies, filters and electrically isolates analog standard signals.

 

Features:

• Two configurable current outputs
• Switching between measuring ranges is calibrated
• Switchable max. operating frequency
• Safe 4-way isolation with 2.5 kV test voltage acc. to EN 61140

Input Output Signal processing Measurement error Power supply Safety and protection: Connection data Geometrical Data

Short description:

The Repeater Power Supply links 2- or 3-wire transmitters located in the field. It provides the power required and transmits the analog signals in an electrically isolated way.

 

Features:

• Power supply to SMART transmitters
• Switching between measuring ranges is calibrated
• Safe 3-way isolation with 2.5 kV test voltage acc. to EN 61140

Input Output MoreSignal processing Measurement error Power supply Safety and protection: Connection data Geometrical Data Mechanical data Material Data

Short description:

The Loop-Powered Isolation Amplifier converts analog, unipolar and bipolar, standard signals. It is also designed to amplify, filter and electrically isolate standard analog signals.

 

Characteristics:

• No additional supply voltage required
• Zero/span adjustment
• Analog, unipolar and bipolar, standard signals at input
• Calibrated scale switching
• Switchable max. operating frequency
• Safe 2-way isolation with 2.5 kV test voltage acc. to EN 61140

Input LessOutput Signal processing Measurement error Power supply Safety and protection: Connection data Geometrical Data Mechanical data Material Data

Short description:

WAGO’s passive isolator (1 channel) electrically isolates and filters 0(4)–20 mA standard analog signals, while drawing power for signal transmission from the input circuit. The connected sensor supplies the passive isolator with the required power to energize the connected load.

 

Characteristics:

• No additional supply voltage required
• Safe 2-way isolation with 2.5kV test voltage acc. to EN 61140

Input LessOutput Signal processing Measurement error Power supply Safety and protection: Connection data Geometrical Data Mechanical data Material Data

Short description:

The Isolation Amplifier converts, amplifies, filters and electrically isolates analog signals.

Features:

• Analog unipolar/bipolar signals at input/output
• A digital signal output reacts to configured measuring range limits (switching ON/OFF delay and threshold value switch function configurable with up to two threshold values).
• A digital HOLD input freezes the output signal.
• Clipping capability provides analog signal limitation to output end values.
• Adjustable software/hardware filter
• Input/Output response simulation via configuration display
• Safe 3-way isolation with 4 kV test voltage acc. to EN 61140

Isolation amplifier; Bipolar current and voltage input signal; Bipolar current and voltage output signal; Digital output; Supply voltage: 24 VDC; 12.5 mm module width

Short description:

The configurable isolation amplifier converts, amplifies, filters and electrically isolates analog standard signals.

 

Features:

• Zero/span adjustment across the entire measuring range
• Switching between measuring ranges is calibrated
• Switchable max. operating frequency
• Safe 3-way isolation with 2.5 kV test voltage acc. to EN 61140

Isolation amplifier; Current and voltage input signal; Bipolar current and voltage output signal; Zero/span adjustment; Supply voltage: 24 VDC; 6 mm module width
Short description:

The universal isolation amplifier converts unipolar and bipolar standard signals and amplifies, filters and electrically isolates analog standard signals.

 

Features:

• Input overcurrent protection via resettable fuse
• Zero/span adjustment across the entire measuring range (push/slide switch)
• Calibrated measuring range switching for all 456 signals
• Analog, unipolar and bipolar, standard signals at input/output
• Switchable max. operating frequency
• Clipping capability allows analog standard signal limitation to upper range values
• Safe 3-way isolation with 2.5 kV test voltage acc. to EN 61140

Short description:

WAGO’s passive isolator (2 channel) electrically isolates and filters 0(4)–20 mA standard analog signals, while drawing power for signal transmission from the input circuit. The connected sensor supplies the passive isolator with the required power to energize the connected load.

 

Characteristics:

• No additional supply voltage required
• Safe 2-way isolation with 2.5kV test voltage acc. to EN 61140

Input Output Signal processing Measurement error Power supply Safety and protection: Connection data Geometrical Data Mechanical data Material Data