Akshay Controls And Systems Private Limited

Features:

• Optical status indication
• Suitable for both parallel and series operation
• Natural convection cooling when horizontally mounted
• Connection technology with push-in termination
• Electrically isolated output voltage (SELV) per EN 62368-1/UL 61010-1

Features:

• Optical status indication
• Suitable for both parallel and series operation
• Natural convection cooling when horizontally mounted
• Connection technology with push-in termination
• Electrically isolated output voltage (SELV) per EN 62368-1/UL 61010-1

Features:

• Optical status indication
• Suitable for both parallel and series operation
• Natural convection cooling when horizontally mounted
• Connection technology with push-in termination
• Electrically isolated output voltage (SELV) per EN 62368-1/UL 61010-1

This internal system supply module increases the capacity of the system supply by 2 A for fieldbus nodes with high current requirements (sum of the internal current consumption of the I/O modules).

If required, additional system supply modules with bus power supply can be used.

The module also supplies field-side power to the adjacent modules via the power jumper contacts.

1. Power supply with TopBoost, PowerBoost and configurable overload behavior
2. Configurable digital signal input and output, optical status indication, function keys
3. Communication interface for configuration and monitoring
4. Optional connection to IO-Link, EtherNet/IPTM, Modbus TCP or Modbus RTU
5. Suitable for both parallel and series operation
6. Natural convection cooling when horizontally mounted
7. Pluggable connection technology
8. Electrically isolated output voltage (SELV/PELV) per EN 61010-2-201/UL 61010-2-201
9. Marker slot for WAGO marking cards (WMB) and WAGO marking strips

• Power supply with TopBoost, PowerBoost and configurable overload behavior.Configurable digital signal input and output, optical status indication, function keys.Communication interface for configuration and monitoring.Optional connection to IO-Link, EtherNet/IPTM, Modbus TCP or Modbus RTU.Suitable for both parallel and series operation.Natural convection cooling when horizontally mounted.Pluggable connection technologe.Electrically isolated output voltage (SELV/PELV) per EN 61010-2-201/UL 61010-2-201.Marker slot for WAGO marking cards (WMB) and WAGO marking strips

The 750-623 Supply Module generates 5, 8, 10, 12 and 15 VDC output voltages from the 24 VDC input voltage.

The output voltage is selected by a DIP switch located on the side of the module.

The output voltage is derived from the CAGE CLAMP® connections. The downstream modules are also supplied with this voltage via the power jumper contacts.

Status LEDs indicate the module’s operating state.

The input voltage and the output voltage are not electrically isolated.